you could suggest me how to make an anvil or a swage block to forge the metals, building chisels or nails levers to pry, I have to knock over with a 10 kg sledgehammer thus seen that the hammer weight incubine weight ratio is one to eight (1x8 ratio weight anvil), the anvil should weigh about eighty kilograms to absorb the blows, you would have suggestions or ideas, the network there are anvils projects with binary beams iron rails, but they are unfit for the purpose, if we knock on it with a hammer heavy fold, thanks for your attention

Name:  8b66699711e351256a31d26912fcbd4f.jpg
Views: 18
Size:  40.1 KB

Name:  ch1-4.jpg
Views: 17
Size:  13.9 KB