FreeWeldingForum.com 
Welding Forum Community presented by LONGEVITY
Results 1 to 3 of 3

Thread: Question about MigWeld 140

  1. #1

    Question Question about MigWeld 140

    I recently purchased the MigWeld 140 and I'm using a spool of .035 flux cored wire. On page 20 of the owners manual it says I need to set the wire feed roller with the 0.8 side facing the user, meaning that I would be using the smaller groove. But on page 25 the chart says I should be using the large groove with .035 flux cored wire. Which is correct?

  2. #2

    Question about Migweld 140

    Hello Madierman. The information on page 25 is the correct information. The larger groove on that roller is 0.035/0.9 and the smaller groove would be for the standard size wire that is 0.030/0.8. Sorry for the confusion. If you have any other questions or concerns please give us a call at: (877) 566-4462 and ask to speak to one of our technicians. They will be more than happy to assist you. Thanks.

    Quote Originally Posted by Madieraman View Post
    I recently purchased the MigWeld 140 and I'm using a spool of .035 flux cored wire. On page 20 of the owners manual it says I need to set the wire feed roller with the 0.8 side facing the user, meaning that I would be using the smaller groove. But on page 25 the chart says I should be using the large groove with .035 flux cored wire. Which is correct?

  3. #3
    Senior Member
    Join Date
    Dec 2010
    Location
    Andover, Ohio
    Posts
    311
    Welcome to the forum Madieraman.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •