FreeWeldingForum.com 
Welding Forum Community presented by LONGEVITY
877 - Long - Inc | 877.566.4462
Results 1 to 3 of 3

Thread: Make 140 drive roller

  1. #1

    Make 140 drive roller

    Does anyone out there know where I can find a make 140 drive roller for flux core I called longevity and they said they don't have one and are working on the problem

  2. #2
    Welcome to the forum Mastiffguy. When you get a chance please post a bit about yourself in the introduce yourself section so we can get to know you.
    What is the outer diameter and core diameter of the rollers you need. Also what kind of keying is done for driving them. I have some rollers that came with my machine that don't come close to what they actually are. I'm willing to part with them if someone can use them.
    Units owned Longevity PROmts 200

    Force Cut LP80 plasma cutter
    Longevity auto dark welding helmet

    Atlas 10x36" lathe
    Craftsman 5HP 30 Gal compressor
    Home made CNC router/plasma/hot wire foam cutting, 3D printing table powered by Longevity Force Cut LP80
    Home built aluminum foundry, HF 4x6 bandsaw

  3. #3
    Senior Member Sling's Avatar
    Join Date
    Jan 2015
    Location
    Wash DC metro
    Posts
    110
    You might try using flux core wire with the MIG wie drive rolls to see if it works. I have done this, and it worked for me, altho it was a different machine. Can't hurt to try.
    Victor o/a
    accumulating tools as projects demand

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •