FreeWeldingForum.com 
Welding Forum Community presented by LONGEVITY
Results 1 to 2 of 2

Thread: HardSurfacing 101 (Video)

  1. #1

    HardSurfacing 101 (Video)

    Goodmorning, everyone!!


    This is one of my newest videos, and it's a little crash-course in hardfacing with a stick welder...





    To be honest, its a little outside my area of experience, but I'd had a LOT of requests for a hardsurfacing video, so I researched it for hours, practiced a little, and put this together... Hopefully, if you're interested in hardfacing, this will be enough to get you started


    Anyway, this is one of those cases where a picture is worth a thousand words, but I'll do my best to describe it for anyone who cant/doesn't want to watch the video itself... I talk a little about what hardsurfacing is, and about preparation for the process... It goes over putting down a "buttering layer" of softer metal to act as a go-between for the softer base metal, and harder "cover layer", and also to repair the base metal... I even wear an apron in this video


    Just thought I'd share... Have an awesome Tuesday, everyone!!


    (I'll have more videos here soon... Although Im currently on "forced vacation" after damaging a camera during a welding shot... Best Buy has it now, the protection plan I bought with the camera covered the new lens, but it'll probably be a week until I can make more videos )

  2. #2
    Senior Member arandall's Avatar
    Join Date
    Dec 2008
    Location
    Saskatoon, Saskatchewan, Canada
    Posts
    1,682
    Good one Lanse!
    Cheers,
    Art R.

    Longevity LS200-PI multi-purpose cutter/welder,
    Miller 180 Auto-Set MIG,
    Custom 5hp compressor,

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •