FreeWeldingForum.com 
Welding Forum Community presented by LONGEVITY
Page 2 of 5 FirstFirst 1 2 3 4 ... LastLast
Results 11 to 20 of 50

Thread: Proma Elektronica THC

  1. #11
    from the video i watched on youtube a pierce height is set up through the plasma user interface in mach3.

    I go to the doc wednesday, I'm guessing hes going to xray my hip and look for arthritis.. My back is better but hip is probably about 50%, it seems to be healing, but its healing very slow for some reason. It feels more like soft tissue than bone, the nurse said that was good. I cant hardly go up steps, have to go one at a time..

    When i find out a little more I'll let you guys know about purchasing a set of three.. I would guess after the doc visit i'll know more, so hoping by next week.
    _____________________________

    1972 Bridgeport Mill
    Thermal Arc 211i
    Thermal Dynamics Cutmaster 52
    Buffalo 4x6 Horizontal Band Saw
    Craftsman Benchtop Drillpress
    Craftsman Bench Grinder
    Craftsman Belt/Disk Sander Combo
    Crafstman Vertical Band Saw
    _____________________________

  2. #12
    I hope it turns out to be soft tissue and heals quickly Brucer. It's hard to do much of anything when the hip hurts.
    Units owned Longevity PROmts 200

    Force Cut LP80 plasma cutter
    Longevity auto dark welding helmet

    Atlas 10x36" lathe
    Craftsman 5HP 30 Gal compressor
    Home made CNC router/plasma/hot wire foam cutting, 3D printing table powered by Longevity Force Cut LP80
    Home built aluminum foundry, HF 4x6 bandsaw

  3. #13
    Brucer,

    Hope you are feeling better.

  4. #14
    Sometimes you just need to stop and smell the roses, working with pain is not the way to go.
    Hope you are doing better in a short time.
    Miller Mig
    Everlast Tig/plasma
    HyperTherm PowerMax 65 & Machine torch
    DIY CNC table for plasma/routing CandCNC DTHC-IV Electronics
    metal lathe
    small milling machine
    Powder coating oven
    2 bead rollers
    small shop
    ect, ect

  5. #15
    Brucer, try this and see what you think. Water Cure 2
    Clausing 5914 - 12 X 36 Lathe (NICE)
    Charriot 6 X 12 Surface Grinder
    American Rotary 5hp Rotary Phase Converter (Good Decision)
    Longevity 200 SX Tig
    Delta Bench Grinder
    Bunch of misc. Tools



    Your Happiness is Intertwined with Your Outlook on Life!

  6. #16
    Quote Originally Posted by OneSpeed View Post
    Brucer, try this and see what you think. Water Cure 2
    Well, they say we should drink more water (up to a point and the website clearly states not too drink too much). Interesting read about the salt part.
    Is it OK to want to break something just so that you can weld it back together?

  7. #17
    Senior Member
    Join Date
    May 2012
    Location
    Midwest, USA
    Posts
    199
    Not sure of the status on this thread, but I would also be interested in this THC unit.
    Paul

  8. #18
    Hey Guys..

    I'm back, never left really.. I have done pretty much like Tom said.. I stopped, took a break, doc took me off work for a while.. I have an appointment the 23rd, then I'm sure I'll be going to a rhematologist..

    Me and my buddy were in the garage tonight cutting his parts I had been fighting with (the acad/mcam issue in another thread).. When we came to cutting the large part, which was about 2feet wide and THC would have been nice... He told me he would talk to a couple other of his 4wheeling buddies to chip in, and if nothing else he said he would buy me one..

    So i'm in on the THC when ever you guys want to hit the button...
    I emailed a viperplasma tonight, to see if we could get some kind of group discount on a purchase of 3 or more..

    When I get the return email I'll copy and paste it here so you guys can see what they say, either good or bad..
    _____________________________

    1972 Bridgeport Mill
    Thermal Arc 211i
    Thermal Dynamics Cutmaster 52
    Buffalo 4x6 Horizontal Band Saw
    Craftsman Benchtop Drillpress
    Craftsman Bench Grinder
    Craftsman Belt/Disk Sander Combo
    Crafstman Vertical Band Saw
    _____________________________

  9. #19
    HI Brucer
    Iím interested in a THC, I have a question about the warranty on the units. If one guy buys for others (they pay him ahead) and sends them out to the others who has the warranty if a problems come up. I would seem to me that the reduced price for 3 units is for one location like a shop.

    Tom
    Last edited by acourtjester; 05-14-2013 at 08:36 AM. Reason: spelling
    Miller Mig
    Everlast Tig/plasma
    HyperTherm PowerMax 65 & Machine torch
    DIY CNC table for plasma/routing CandCNC DTHC-IV Electronics
    metal lathe
    small milling machine
    Powder coating oven
    2 bead rollers
    small shop
    ect, ect

  10. #20
    Tom,

    I will ask them that question.
    _____________________________

    1972 Bridgeport Mill
    Thermal Arc 211i
    Thermal Dynamics Cutmaster 52
    Buffalo 4x6 Horizontal Band Saw
    Craftsman Benchtop Drillpress
    Craftsman Bench Grinder
    Craftsman Belt/Disk Sander Combo
    Crafstman Vertical Band Saw
    _____________________________

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •