FreeWeldingForum.com 
Welding Forum Community presented by LONGEVITY
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12

Thread: New member approval and Gallery posts

  1. #1

    New member approval and Gallery posts

    I'm not going to have Internet access till at least Nov. 6th so I won't be able to approve moderated posts or promote new moderated users or full membership. I also won't be able to approve Gallery images that land in the moderation queue. I let Longevity know this and they will try to stay on top of it but they are very busy so I would expect delays in these processes. Sorry for any inconvenience. All forum posts with images should post without any needed approval though so the forum flow should be normal.
    Dan
    Units owned Longevity PROmts 200

    Force Cut LP80 plasma cutter
    Longevity auto dark welding helmet

    Atlas 10x36" lathe
    Craftsman 5HP 30 Gal compressor
    Home made CNC router/plasma/hot wire foam cutting, 3D printing table powered by Longevity Force Cut LP80
    Home built aluminum foundry, HF 4x6 bandsaw

  2. #2
    Thanks for everything, Gadget! We'll be fine. Have a great trip and I hope the marathon goes on without a hitch. Cheers!
    Is it OK to want to break something just so that you can weld it back together?

  3. #3
    I'm in Chicago now waiting to see if our flight gets cancelled. All flights through Wed. Are cancelled but ours is Thursday, I should know by tomorrow.
    Units owned Longevity PROmts 200

    Force Cut LP80 plasma cutter
    Longevity auto dark welding helmet

    Atlas 10x36" lathe
    Craftsman 5HP 30 Gal compressor
    Home made CNC router/plasma/hot wire foam cutting, 3D printing table powered by Longevity Force Cut LP80
    Home built aluminum foundry, HF 4x6 bandsaw

  4. #4
    My fingers are crossed for you! I know the marathon organizers, on their end, will be pulling out all of the stops to make sure their event is ready when the time comes.
    Is it OK to want to break something just so that you can weld it back together?

  5. #5
    Good luck Gadget! Hope your race goes off with out a hitch.
    Steve
    Miller Dialarc 250
    Lincoln Ranger250
    Longevity TigWeld 200DX

  6. #6
    Senior Member roberts56's Avatar
    Join Date
    Oct 2012
    Location
    Metro Manila, Philippines
    Posts
    266
    HI there Gadget, good luck and hope everything goes well and on schedule with your race.

  7. #7
    Interesting article. This might be a good indication for Gadget's flight into NY.

    After Sandy, canceled flights but no airport chaos - Yahoo! News
    Is it OK to want to break something just so that you can weld it back together?

  8. #8
    Have fun! I thought KHK was a moderator?
    Masseyman
    -- The only time you stop learning, is when you're 6ft under --

    Longevity 200 SX
    Home made CNC
    Fancy Soldering Iron (hey, it melts metal)
    Various power tools (most resurected from what other people thought were dead)
    Drill press
    Mini Metal Lathe

  9. #9
    Quote Originally Posted by Masseyman View Post
    Have fun! I thought KHK was a moderator?
    He does what he can but he doesn't have admin rights.
    Units owned Longevity PROmts 200

    Force Cut LP80 plasma cutter
    Longevity auto dark welding helmet

    Atlas 10x36" lathe
    Craftsman 5HP 30 Gal compressor
    Home made CNC router/plasma/hot wire foam cutting, 3D printing table powered by Longevity Force Cut LP80
    Home built aluminum foundry, HF 4x6 bandsaw

  10. #10
    Quote Originally Posted by Gadget View Post
    He does what he can but he doesn't have admin rights.
    Admin rights aka "Supreme ruler rights". LOL Oh the power he holds!
    Is it OK to want to break something just so that you can weld it back together?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •