FreeWeldingForum.com 
Welding Forum Community presented by LONGEVITY
877 - Long - Inc | 877.566.4462
Page 1 of 12 12311 ... LastLast
Results 1 to 10 of 120

Thread: "BIG CASH" WELDING CONTEST - USER FRIENDLY $1800.00 WINNER! Ends January 6th, 2013

  1. #1
    www.longevity-inc.com LONGEVITY's Avatar
    Join Date
    Sep 2007
    Location
    Hayward, CA
    Posts
    1,162
    Images
    3
    Thanks
    40
    Thanked 56 Times in 48 Posts

    Thumbs up "BIG CASH" WELDING CONTEST - USER FRIENDLY $1800.00 WINNER! Ends January 6th, 2013



    Hi Everyone,

    The last contest was a success. The last winner of the big Cash Contest on June 3rd, 2012 was acourtjester.

    So why wait to launch another? We are not waiting. Here you go, same rules, same participation requirements, and same big prize!

    The contest starts today and will end on
    January 6th, 2013.




    Some are frustrated with the requirements of the last contest so we made some changes. The new contest will feature the following rules:

    Here are the requirements:

    1. Every 10 posts is one entry. (You are responsible to post your current count of posts in this thread prior to entering the contest.) If you are planning to enter, please enter your current post count in a reply to this thread. You can post as much as you want for a better chance. You will need to have at least 10 new posts to be considered an entry.

    Example of entry post: For example, if you have 20 posts now and will have 30 posts since the new contests starts for a total of 50 posts at the end of the contest, you will have THREE (3) entries in the raffle drawing.

    2. Every 3 pictures uploaded to the gallery is worth 1 entry. You can post as many pictures as you want for a better chance to win.

    Example: If you have 3 current pictures now, and you add 3 photos for a total of 6 photos at the end of the contest, you will add an additional entry for the drawing. (You are responsible to state the current photos in your gallery correctly to not risk disqualification). You will need to have at least 3 photos uploaded to be considered as an entry.

    2. You will need to have an AVATAR.

    3. You will need to have a SIGNATURE stating what equipment you have or what equipment you previously used.

    4. You will need to reply to this thread with your current post count, your current gallery count, whether you have an avatar or signature, and any additional information you need to have to enter as mentioned above.

    You will be required to DEMAND to enter the contest in your post!

    Perfect Example of an Entry:
    "I currently have 360 posts
    I currently have 33 photos in my gallery
    I have an avatar
    I have a signature
    I respectfully DEMAND to to enter this contest"


    Terms:

    The winner will also have to add themselves to the try before you buy program featured on our forum, they must keep the unit(s) for 1 year from the end date of the contest, and the winner will have to show at least 4 pictures of the machine in action on our welding projects and pictures section. The winner will receive an $1800 discount coupon code good for one month on Welding Machine, Welder, Welding Supplies, Welders, Welding Equipment. The winner will not have an option for cash back on the contest. The winner has 1 months to spend the cash prize on Welding Machine, Welder, Welding Supplies, Welders, Welding Equipment. Should a model be unavailable, the winner can opt to wait or proceed with purchasing another model. If the value of the desired goods is higher than the allowed cash, the winner will have to cover the difference at the winner's expense. Once you have met all 4 requirements, please DEMAND to enter by replying to this thread. There are no cash value refunds. Standard warranty applies. By entering you agree to the terms. This is a $1800+ value drawing.

    Good Luck!

    Simon
    Last edited by Gadget; 02-21-2013 at 07:07 AM.
    Longevity Welding
    Toll-Free Support: 1-510-887-7090 / 1-877-566-4462
    Business Hours: Monday-Friday 8AM to 4PM

  2. #2
    Moderator Gadget's Avatar
    Join Date
    Nov 2007
    Location
    Michigan
    Posts
    6,163
    Images
    291
    Thanks
    153
    Thanked 211 Times in 199 Posts
    OK, let's try this again
    "I currently have 4624 posts
    I currently have 148 photos in my gallery
    I have an avatar
    I have a signature
    I respectfully DEMAND to to enter this contest"
    Units owned Longevity PROmts 200
    Longevity WeldPro LS200PI (IGBT)
    Force Cut LP80 plasma cutter
    Longevity auto dark welding helmet

    Atlas 10x36" lathe
    Craftsman 5HP 30 Gal compressor
    Home made CNC router/plasma/hot wire foam cutting, 3D printing table powered by Longevity Force Cut LP80
    Home built aluminum foundry, HF 4x6 bandsaw, O/A torch

  3. #3
    Senior Member undercut's Avatar
    Join Date
    Apr 2012
    Location
    Washington
    Posts
    3,059
    Images
    91
    Thanks
    81
    Thanked 57 Times in 57 Posts
    This entry has been withdrawn by Undercut. (Gadget)

    I currently have 206 posts
    I currently have 0 photos in my gallery
    I have an avatar
    I have a signature
    I respectfully DEMAND to to enter this contest

    Good luck to all! January 2013 seems so far away!
    Last edited by Gadget; 12-08-2012 at 03:53 PM.
    Looking for a Plasma Cutter[/I]
    Meager selection of grinders, clamps and magnets to get by on

    Is it OK to want to break something just so that you can weld it back together?

  4. #4
    Senior Member WookieWelding's Avatar
    Join Date
    Jan 2011
    Location
    Socal
    Posts
    1,122
    Images
    92
    Thanks
    21
    Thanked 60 Times in 53 Posts
    I currently have 575 posts
    I currently have 61 photos in my gallery
    I have an avatar
    I have a signature
    I respectfully DEMAND to to enter this contest
    Syncrowave 250
    TigWeld 250
    PowerArc 140 ST
    Victor oxy/acetylene/Propane

    Bunch of tools of the trade to much to list
    WeldingTradesman

  5. #5
    Senior Member poodle's Avatar
    Join Date
    Jul 2010
    Location
    Texas
    Posts
    589
    Images
    36
    Thanks
    18
    Thanked 35 Times in 33 Posts
    My turn!
    I currently have 340 post
    I currently have 21 photos in my gallery
    I have an avatar
    I have a signature
    I respectfully DEMAND to enter this contest
    Steve
    Miller Dialarc 250
    Lincoln Ranger250
    Longevity TigWeld 200DX

  6. #6
    Senior Member gilly's Avatar
    Join Date
    Jul 2010
    Location
    Perdido Bch. Al.
    Posts
    870
    Images
    72
    Thanks
    0
    Thanked 24 Times in 24 Posts
    I currently have 769 posts
    I currently have 61 pictures in my gallery
    I have an avatar
    I have a signature
    Please enter me in the contest
    Guy

    Miller Syncrowave 250 DX
    Millermatic Challenger Mig
    Century 230/140 amp AC/DC Stick
    DeVilbiss 6Hp 60Gal.
    HF Horizontal/Vertical Bandsaw
    HF 6in. Belt 9in. Disc Sander
    HF pipe bender
    HF tubing roller
    Springfield machine tool co. 14X40 lathe

  7. #7
    Moderator KHK's Avatar
    Join Date
    Oct 2008
    Location
    Chicago suburbs
    Posts
    2,709
    Images
    112
    Thanks
    0
    Thanked 58 Times in 56 Posts
    Let's try again!!
    I currently have 2585 post
    I currently have 84 photos in my gallery
    I have an avatar
    I have a signature
    I respectfully DEMAND to enter this contest
    keith
    The older the Boys, the more expensive the TOYS
    Previously Owned equipment;
    lot's
    Current equipment;
    3HP Speedair air compressor, Wilton drill press, Craftsman 10x36 lathe, 10 ton hydrolic press, Portaband band saw, OA torch, Small home brew CNC machine, powered by my 200PI
    2 Longevity autodarking helmets
    160d MIG
    WeldAll 200PI

  8. #8
    Senior Member BucketObolts's Avatar
    Join Date
    Jun 2012
    Location
    Simi Valley Ca.
    Posts
    403
    Images
    17
    Thanks
    9
    Thanked 10 Times in 10 Posts
    I currently have 12 posts.
    I currently have 0 photo's in my gallery.
    I have an avatar.
    I have a signature
    I respectfully DEMAND to enter this contest

    EDIT* I don't know why my signature is not showing?
    Last edited by BucketObolts; 06-17-2012 at 12:10 PM. Reason: signature is not showing

  9. #9
    Senior Member arandall's Avatar
    Join Date
    Dec 2008
    Location
    Saskatoon, Saskatchewan, Canada
    Posts
    1,638
    Images
    67
    Thanks
    30
    Thanked 40 Times in 39 Posts
    OK. Count me in again too.
    My current post count is 1446, and total media count is 60.
    I have a signature, and avator.
    I respectfully demand to be entered.
    Cheers,
    Art R.

    Longevity LS200-PI multi-purpose cutter/welder,
    Miller 180 Auto-Set MIG,
    Custom 5hp compressor,

  10. #10
    Senior Member mountain eagle's Avatar
    Join Date
    Nov 2010
    Location
    5280 = Denver, CO
    Posts
    194
    Images
    12
    Thanks
    5
    Thanked 5 Times in 4 Posts
    Yeah yeah, maybe I'll be around more.............

    count me in.

    Current Posts
    179
    Current Images
    15
    I have an avatar.
    I have a signature
    I respectfully DEMAND to enter this contest
    mountain eagle
    longevity forcecut 50i
    miller econotig
    millermatic 185
    speedglas lid

Page 1 of 12 12311 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •