FreeWeldingForum.com 
Welding Forum Community presented by LONGEVITY
877 - Long - Inc | 877.566.4462
Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: Carbon Fiber Elite

  1. #11
    Senior Member JolietJames's Avatar
    Join Date
    Sep 2010
    Location
    IL for now then Tucson!
    Posts
    603
    I don't know if I have any purchase information. It came with a Tigweld 200 I bought on September special off Pirate4x4 last year. Here in Illinois, sun is a scarce commodity! I can put it under a lamp to try to recharge it though. Think that will work? Thanks for the reply!
    HTP Mig 2400
    HTP Microcut 625
    Longevity Tigweld200
    Hubangus blast cabinet
    Enco Mill
    O/A torch setup
    PT105 Bender
    Notchmaster
    4X6 bandsaw
    Portaband
    30T press
    Enco 50" slip roller

  2. #12
    Senior Member INSANITY's Avatar
    Join Date
    Jan 2011
    Location
    Oak Lawn, IL.
    Posts
    642
    Don't you have purchase information from the Tigweld 200 PURCHASE?
    LINCOLN ELECTRIC WELD PAK - 3200HD
    THERMAL DYNAMICS PAK MASTER 38XL
    HARRIS OXY/ACET.

  3. #13
    Senior Member JolietJames's Avatar
    Join Date
    Sep 2010
    Location
    IL for now then Tucson!
    Posts
    603
    I don't know if I do or not. We switched from Comtheft to ATT for our internet within the last year so I don't have any old emails. Perhaps I still have something in my Pirate PMs.
    HTP Mig 2400
    HTP Microcut 625
    Longevity Tigweld200
    Hubangus blast cabinet
    Enco Mill
    O/A torch setup
    PT105 Bender
    Notchmaster
    4X6 bandsaw
    Portaband
    30T press
    Enco 50" slip roller

  4. #14
    how about the serial number from the welding machine
    Ahp 200x tig acdc
    forcecut 42i
    Miller xmt350
    Lincoln LN-25
    Victor oxy/acetylene/
    Bunch of tools of the trade to much to list
    http://instagram.com/weldor_wes/

  5. #15
    Senior Member JolietJames's Avatar
    Join Date
    Sep 2010
    Location
    IL for now then Tucson!
    Posts
    603
    Now that is something I can provide if its of any help. It was sunny today so I threw the helmet outside and it should get a solid 4-5hrs of sun. I'll bring two helmets to class tonight in case it isn't enough to get the thing working. I'm skeptical but hopefull at the same time. I'll weld with it close by if I wear the Jackson tonight too in hopes it may charge more quickly being exposed to the arc.
    HTP Mig 2400
    HTP Microcut 625
    Longevity Tigweld200
    Hubangus blast cabinet
    Enco Mill
    O/A torch setup
    PT105 Bender
    Notchmaster
    4X6 bandsaw
    Portaband
    30T press
    Enco 50" slip roller

  6. #16
    it should be charging as you weld as the weld puddle is as bright as the sun is
    i am assuming since it does not have a battery it has a capacitor is charges or something

    ---------- Post added at 02:23 PM ---------- Previous post was at 12:43 PM ----------

    Quote Originally Posted by JolietJames View Post
    Now that is something I can provide if its of any help. It was sunny today so I threw the helmet outside and it should get a solid 4-5hrs of sun. I'll bring two helmets to class tonight in case it isn't enough to get the thing working. I'm skeptical but hopefull at the same time. I'll weld with it close by if I wear the Jackson tonight too in hopes it may charge more quickly being exposed to the arc.
    i am pretty sure simon can track it by machine serial number give him a call
    Ahp 200x tig acdc
    forcecut 42i
    Miller xmt350
    Lincoln LN-25
    Victor oxy/acetylene/
    Bunch of tools of the trade to much to list
    http://instagram.com/weldor_wes/

  7. #17
    Sometimes when mine gets cantankerous and doesn't want to shade right when I KNOW it has been exposed enough to be charged I take it apart and clean it. Sometimes that HELPS TREMENDOUSLY... Lot of times not only the way it performs but in terms of visibility as well. Those things get a lot dirtier than you would think under that protective cover lens.
    Just Sensible Concepts
    *Longevity Weldall 160PI (technically it's not mine but it is on MY inventory for my shop at work)
    Lincoln Weldanpower 200
    Lincoln Pro Mig 180
    Lincoln AC225

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •