FreeWeldingForum.com 
Welding Forum Community presented by LONGEVITY
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 23

Thread: BAHHHAAAHAAAA!!!! seriously

  1. #1

    BAHHHAAAHAAAA!!!! seriously

    saw this and had to take a pic of it..... dang.... if i tried that, i would get pulled over and they would put me under the jail, not just in it
    Torchmate 5 x 10 custom built CNC table
    6 (each) Thermadyne 252i mig/ stick/ tig
    Thermal Dynamics a-60 automated cutter
    Thermal cutmaster 52 handheld cutter
    '07 pro300 miller
    '08 275 trailblazer miller
    '99 250 trailblazer
    12vs extreme suitcase feeder
    2 (each) xr-a 50 foot push-pull feeders (for aluminum mig)
    800 ton break
    400 ton shear
    MM350p
    xmt 304
    (do i REALLY need to keep going?)

    nothing fancy, just a few hot glue guns for metal

    www.sicfabrications.com

  2. #2
    That is wrong on so many levels.
    Units owned Longevity PROmts 200

    Force Cut LP80 plasma cutter
    Longevity auto dark welding helmet

    Atlas 10x36" lathe
    Craftsman 5HP 30 Gal compressor
    Home made CNC router/plasma/hot wire foam cutting, 3D printing table powered by Longevity Force Cut LP80
    Home built aluminum foundry, HF 4x6 bandsaw

  3. #3
    Yea the colors of the trailer and the truck totally clash.
    Steve
    Miller Dialarc 250
    Lincoln Ranger250
    Longevity TigWeld 200DX

  4. #4
    dude was on the freeway like that.... notice the bent receiver hitch on the back of the truck?
    Torchmate 5 x 10 custom built CNC table
    6 (each) Thermadyne 252i mig/ stick/ tig
    Thermal Dynamics a-60 automated cutter
    Thermal cutmaster 52 handheld cutter
    '07 pro300 miller
    '08 275 trailblazer miller
    '99 250 trailblazer
    12vs extreme suitcase feeder
    2 (each) xr-a 50 foot push-pull feeders (for aluminum mig)
    800 ton break
    400 ton shear
    MM350p
    xmt 304
    (do i REALLY need to keep going?)

    nothing fancy, just a few hot glue guns for metal

    www.sicfabrications.com

  5. #5
    He was on the freeway because the access road is to rough. I see clowns like that all the time and you are right if we were to try it off to jail we would go. I was driving a brand new Chevy dually pulling a new goose neck once and got pulled over so I could get a ticket for no brake away braking system. Some guys I work with told me they seen the patrolman checking my truck out while it was pulled over and I was inside talking to a boss. When I left here he came and nailed me.
    Steve
    Miller Dialarc 250
    Lincoln Ranger250
    Longevity TigWeld 200DX

  6. #6
    new dot standards in arkansas.... if you running a 1-ton truck and put t trailer on the back capable of 12k, you must have a class A cdl now..... even though there arent any air brakes, still gotta have that class A..... they talking about extending that to 3/4 ton trucks now as well...... booooo
    Torchmate 5 x 10 custom built CNC table
    6 (each) Thermadyne 252i mig/ stick/ tig
    Thermal Dynamics a-60 automated cutter
    Thermal cutmaster 52 handheld cutter
    '07 pro300 miller
    '08 275 trailblazer miller
    '99 250 trailblazer
    12vs extreme suitcase feeder
    2 (each) xr-a 50 foot push-pull feeders (for aluminum mig)
    800 ton break
    400 ton shear
    MM350p
    xmt 304
    (do i REALLY need to keep going?)

    nothing fancy, just a few hot glue guns for metal

    www.sicfabrications.com

  7. #7
    Senior Member arandall's Avatar
    Join Date
    Dec 2008
    Location
    Saskatoon, Saskatchewan, Canada
    Posts
    1,682
    I like the custom work on the trailer. - Notice how the bottom of the box is trimmed to make it parallel to the road - nice touch. Kind of a "rat trailer".

    Cheers,
    Art R.
    Cheers,
    Art R.

    Longevity LS200-PI multi-purpose cutter/welder,
    Miller 180 Auto-Set MIG,
    Custom 5hp compressor,

  8. #8
    Moderator KHK's Avatar
    Join Date
    Oct 2008
    Location
    Chicago suburbs
    Posts
    2,702
    That is an accident waiting to happen!! I wonder if a insurance company would cover the losses..
    keith
    The older the Boys, the more expensive the TOYS
    Previously Owned equipment;
    lot's
    Current equipment;
    3HP Speedair air compressor, Wilton drill press, Craftsman 10x36 lathe, 10 ton hydrolic press, Portaband band saw, OA torch, Small home brew CNC machine, powered by my 200PI
    2 Longevity autodarking helmets
    160d MIG
    WeldAll 200PI

  9. #9
    if it came loose and hit my wife while on the road, he wouldnt have to worry about an insurance company.... there would be a lil puddle of blood n snot on the ground where dude used to stand...
    Torchmate 5 x 10 custom built CNC table
    6 (each) Thermadyne 252i mig/ stick/ tig
    Thermal Dynamics a-60 automated cutter
    Thermal cutmaster 52 handheld cutter
    '07 pro300 miller
    '08 275 trailblazer miller
    '99 250 trailblazer
    12vs extreme suitcase feeder
    2 (each) xr-a 50 foot push-pull feeders (for aluminum mig)
    800 ton break
    400 ton shear
    MM350p
    xmt 304
    (do i REALLY need to keep going?)

    nothing fancy, just a few hot glue guns for metal

    www.sicfabrications.com

  10. #10
    Senior Member arandall's Avatar
    Join Date
    Dec 2008
    Location
    Saskatoon, Saskatchewan, Canada
    Posts
    1,682
    Sicfab:
    You definately have a way with words!

    Art R.
    Cheers,
    Art R.

    Longevity LS200-PI multi-purpose cutter/welder,
    Miller 180 Auto-Set MIG,
    Custom 5hp compressor,

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •