PDA
View Full Version :

New Migweld 140 AWESOME!!!



blueriver
01-20-2015, 03:06 PM
Yesterday the new Mig 140 and spoolgun arrived ... took about 1/2 hr and I was running beads. Today I put it to work ... after a couple settings to get it to sizzle I ran several welds on the grapple system and thought I would surely hit the cycle duty ... NOT ... this little welder is a BIG machine ... I used it to weld Schedule 40 pipe collars to rectangular 11 ga tube ... puts down a very nice bead ... I have not used the spool gun.

I'll get some pictures and a video ... I'm using 75/25 gas.

Tigmaniac
01-20-2015, 05:15 PM
Woo Hoo gotta love a new machine!

blueriver
01-21-2015, 05:08 AM
Especially when straight out of the box in surpasses your expectations ... then more positive feelings when you go to work with it.

blueriver
01-22-2015, 06:41 AM
I used her yesterday ... had to build 5 chambers for the accumulator ... I ran a test on pipe, just reached under the bench and grabbed a pipe and a tube .. didn't bother taking a brush to them cause I wanted to see what it would do on dirty stuff ... I know bad idea!!

9832

9833

9834

Gadget
01-22-2015, 08:03 AM
Nice welds. I'm going to have to get some C25 and stop using the flux core on my ProMTS 200.

blueriver
01-22-2015, 08:07 AM
Nice welds. I'm going to have to get some C25 and stop using the flux core on my ProMTS 200.

You will not regret doing that!!