PDA
View Full Version :

CNC Plug Pinout Question



urbnsr
05-02-2013, 05:44 PM
Can someone confirm the pinout of the CNC plug for the divided arc voltage output. It looks like pin 6 is the positive (+) output and pin 4 is the negative (-). I guess the reason I ask is that I don't understand pin 3 with the 100k positive resistance. Thanks in advance.
PK

mansuor
01-05-2015, 09:31 AM
same my problem
http://im79.gulfup.com/93faX5.jpg (http://www.gulfup.com/?Jt062O)

seeimadeit
01-05-2015, 03:47 PM
Have a look at this link,
https://github.com/regeg/ArdunioTHC
there is a word document that describes the pinouts for an everlast power plasma 50, it's identical to your image. the document goes into great depth. I found really helpful.
( document is called Arduino THC Manual.docx (https://github.com/regeg/ArdunioTHC/blob/master/THC%20Manual/Arduino%20THC%20Manual.docx))

Peter