PDA
View Full Version :

torch press on sheet



mansuor
03-09-2013, 05:43 AM
I have a problem ..i connect the sensor wire to the torch where it if touching the sheet axis balancing Z auto, but axis Z the very pressing on the sheet.
I know that the mechanism related to the conversion to an G-code, but how I work is when touching torch sheet stop pressing .
In short: How to Make the torch works by THC nor follow ordered G-code?

Gadget
03-09-2013, 06:38 AM
I don't have THC so I can't really help but it might be helpful if you were to tell us what THC you are using and what program you are using to drive your CNC table.

mansuor
03-09-2013, 08:40 AM
THC : XPTHC-Portable300
g-code: sheetcam
cnc : HYD 2100
best regards