PDA
View Full Version :

Tigweld 160SX/200SX Clearance Effect



Cope
12-28-2012, 03:23 PM
It is my understanding that Clearance Effect only works on AC, but I have heard from two different sources that it works with DC also. Please clarify. I could try making some welds at different settings, but my tig welds aren't good enough to tell.:-|

undercut
12-29-2012, 01:16 AM
It is my understanding that Clearance Effect only works on AC, but I have heard from two different sources that it works with DC also. Please clarify. I could try making some welds at different settings, but my tig welds aren't good enough to tell.:-|

I thought I saw in a video that the clearance effect on the 160sx/200sx was a simulated AC balance. Not sure what "simulated" means but AC balance settings shouldn't have any effect on DC welding. My 2 cents.

WookieWelding
12-29-2012, 02:14 AM
clearance iirc AC balance would only do anything on AC
since it is controlling EP % to EN %

Cope
12-29-2012, 05:38 AM
clearance iirc AC balance would only do anything on AC
since it is controlling EP % to EN %

Thanks, that's what I thought.