PDA
View Full Version :

Dual Voltage Plasma Cutting... With A ForceCut 42i



ChuckE2009
12-01-2012, 08:12 AM
Morning everyone!!

So, I recently for this nice little ForceCut from the good folks at Longevity to make videos with, and so far, I'm VERY impressed with it! I've made it through 1" plate on 220v, and even gotten to play with it on 110v some.

Honestly, Im not all that big on 110v machines, when I first started welding, I bought a used Lincoln 110v mig welder off the local Craigslist, and when I move up to my 220V Hobart MIG, I swore I'd never go back, but this whole "Dual Voltage" thing isnt a bad setup, at all.

You get 220v of pure power for most things, but if you have to go somewhere and work on something that you can't get to your shop for whatever reason, just use that little pigtale adapter, and you can still make it through some pretty thick plate if need be. Its like having a regular 220 machine, that you can take anywhere :bounce

Heres a video I made... Its a Severance Test of the machine, incase you're wondering what it can do on 1/2 the input power. Oh, and few other things you might like to know about dual-voltage plasma cutters.

Enjoy the video everyone, and happy welding :)




http://youtu.be/wPBFT7Ldwr4

Gadget
12-01-2012, 08:34 AM
Hi Chuck and welcome to the forum. I fixed the video link to embed it in the post.
Dan

WookieWelding
12-01-2012, 08:38 AM
whats up Lanse welcome to the forum
Your Vids are a few of my favs out there on youtube for welding its been fun watching you learn the art of welding via youtube

undercut
12-01-2012, 12:33 PM
Amazing what you can do with 110v in a pinch. Welcome to the forum! :D

gilly
12-01-2012, 04:06 PM
Welcome to the forum Lanse, really enjoy your video's.

ChuckE2009
12-01-2012, 04:23 PM
Wow, quite the warm welcome over here!!

Gadget, thanks!! I'll get the hang of it :)

And everyone else... Thanks to you, too. I'll have more videos here real soon :)

Nathan Stiltner
12-02-2012, 10:08 PM
Yeah welcome as well Lance.. Your outake Vids are hilarious....Got some family pretty close to Brookville.. Have to get together sometime..
Take Care
Nathan

KHK
12-03-2012, 11:20 AM
Hello and WELCOME!! Good Video!

Logosweld
05-16-2014, 10:37 AM
really video helps a lot because if someone have less knowledge about the particular thing he/she can easily get it through the video...plasma cutting tool its nice

Logosweld
05-29-2014, 09:27 AM
the above video is really nice because it should be well known to all the welders because it is important in the welding projects and has lot of usage