PDA
View Full Version :

How to build your plasma table.



THECNCMAN
07-08-2011, 05:22 PM
Hi guys I will go to explain how to build the plasma table is highest recommended use the
MACH3 AND SHEET CAM to run very nice and smooth. if you want to buy the cnc kit you can go to: Connection Problem (http://www.kelinginc.com). depend of the sizes of the machine are the motor and drivers. 4x8 (425 oz motors and 4030 drivers. They came with power supply, breakout board and power supply for breakout) 4x6 or 4x4 ( 270 oz motor and the rest same)

---------- Post added at 06:19 PM ---------- Previous post was at 06:12 PM ----------

The first post don't let me give you the web site of KELINGINC. is easy go to ebay under stepper motor and you find him in the store he has all you need.

---------- Post added at 06:22 PM ---------- Previous post was at 06:19 PM ----------

some body ask and I answer all questions

Tritium
07-08-2011, 08:41 PM
Isn't the site you wanted to reference Stepper Motor Driver Power Supply Kit | CNC Router - Keling Technology Inc, USA (http://kelinginc.net) ?

Thurmond

THECNCMAN
07-08-2011, 09:33 PM
Yes. are very good I have motors and drivers bought 3 years ago and working 12 hours a day like horse beatyfull.

WookieWelding
12-02-2011, 01:19 AM
thank you for posting the link cncman

dano1987
12-09-2011, 05:19 AM
Isn't the site you wanted to reference Stepper Motor Driver Power Supply Kit | CNC Router - Keling Technology Inc, USA (http://kelinginc.net) ?

Thurmond

Thanks for sharing that link, it's just what I was after.

Gadget
12-09-2011, 07:38 AM
Thanks for sharing that link, it's just what I was after.

Hi Dano and welcome to the forum. When you get a chance please post a bit about yourself in the introduce yourself section so we can get to know you.
I've built my own CNC table, KHK has also. We are more than willing to help you out in that area if you need help. There are also several others here currently in the process of building their CNC tables so you will be in good company here.

JolietJames
12-09-2011, 10:28 AM
Feel free to spill as much plasma table inofmation as you like all over this place.
I'm so going to make like a sponge...

samsberr
01-31-2012, 10:41 AM
Feel free to spill as much plasma table inofmation as you like all over this place.
I'm so going to make like a sponge...

The table I made is for the 2 X 2 Torchmate... I made it a low profile on
castors so I can roll it back under the bench when not in use...It's also setup to index 8, 10 & 12' sections if needed...

4529
4530

Nick
02-02-2012, 05:48 PM
The table I made is for the 2 X 2 Torchmate... I made it a low profile on
castors so I can roll it back under the bench when not in use...It's also setup to index 8, 10 & 12' sections if needed...

Very nice. :D