PDA
View Full Version :

Settings for recent weld



Gadget
05-10-2008, 04:30 PM
I will be posting the settings for the TIG welding I do for awhile as well as a photo of the results. Perhaps that will help others learn how to do this. I am still learning and haven't mastered the beautiful welds I have seen others do but the welds aren't going to break either.
I used a red 1/8" rod with 3/32 filler (probably too large). Flow meter was on 8 liter per. Size 6 cup. The basic current was set to max for the 1/4" welding (corner weld) and the settings shown for the 1/16" plate added on. I used the switch on the handle and manually set the current so I could take a photo of the settings.