PDA
View Full Version :

ForceCut 80 max cut depth test.



Gadget
06-12-2009, 05:23 PM
This was a test cut to see what the maximum cut depth was on the ForceCut 80. I had the unit set at 80 amps and had 105 PSI air pressure. I used the roller guide but had one wheel slightly lower than the other and cut on a slight angle.
Wound up at 1.75 inch depth clean cut. I think I might be able to get to 2" with more air pressure and a better setting on the guide wheel. I will try it and take another video.
Dan
kOa-sehu7zE

KHK
06-12-2009, 09:30 PM
Looks good Dan!! We will be waiting for the 2 in cut!